MKxx29GSG

Product Features

    • 1.8-inch 120 GB to 250 GB Capacity
    • Serial ATA (SATA) interface
    • Micro-SATA connector
    • 5400 rpm
    • Operating shock: 500G
    • Non-Operating shock: 1,500G

Product info

Toshiba Storage Device Division strengthens it’s embedded hard disk drive portfolio by launching a new 1.8-inch HDD. The MK1229GSG delivers the capacity and speed needed to upgrade a notebook without compromising battery life or quiet acoustics. The dual platter SATA drive featuring a capacity of 120GB offers a rotational speed of 5400 rpm and a fast media transfer rate of up to 150 Mbits per second. It has also the advantage of 500 G of operating shock and 1500 G of non operating shock.

Weighting only 62 grammes, the new Toshiba HDD is designed to be the perfect drive for individuals and developers desiring a more powerful computer in a compacter form.

  • Technical Specs
    • Model
        MK1229GSG MK1629GSG MK2529GSG
      Features
      Part number HDD1F09 HDD1F08 HDD1F07
      Formatted capacity 120,034 MByte 160,042 MByte 250,059 MByte
      Form factor 1.8 inch
      Interface type
      • Serial ATA (Micro SATA)
      Supported interface standards
      • ATA-8
      • Serial ATA Rev. 2.6
      Head/actuator technology
      • "Ramp-Load" Technology
      • PMR (Write)/TMR (Read)
      Shock detection Shock sensor circuit
      S.M.A.R.T. The SMART command set is supported.
      Physical parameters
      Number of platters 1 2 2
      Number of cylinders 114,600
      Number of heads 2 4 4
      Bytes/sector
      Bytes/sector 512
      Access times
      Average seek time 15 ms
      Maximum seek time 26 ms
      Track-to-track seek time 3 ms
      Transfer rates
      Host 3.0 Gbit/s
      Rotational speed
      Rotational speed 5,400 rpm
      Buffer
      Buffer size 8,192 kByte
      Cache
      • Read-ahead cache
      • Write cache
      Reaction times
      Start time (Spin-up time, typical) 3.5 s
      Start time (Spin-up time, maximum) 20 s
      Recovery time (from stand-by, typical) 3 s
      Recovery time (from stand-by, maximum) 20 s
      Reliability specifications
      MTBF 600,000 Hours
      Power-on hours <333 hours/month Hours
      Product life 5 years or 20,000 POH (whatever comes earlier)
      Seek error rate 1 error per 10^6 seeks
      Non-recoverable error rate 1 error per 10^14 seeks
      Preventive maintenance No preventive maintenance is required
      Power consumption
      Start (Maximum) 2.5 W
      Seek (Average) 1.2 W
      Read (Average) 1.2 W
      Write (Average) 1.2 W
      Low-power idle (Average) 0.4 W
      Sleep (Average) 0.13 W
      Stand-by (Average) 0.18
      Power supply
      Supply voltage +3.3 V (+/-5 %)
      Allowable noise/ripple Max. 70 mV
      Mechanical specifications
      Drive width 54 mm
      Drive height 8.0 mm
      Drive depth 78.5 mm
      Drive weight 0.060 kg 0.062 kg 0.062 kg
      Drive orientation The drive can be installed in all axes (6 directions)
      Temperature
      Operating
      • From 5 °C to 55 °C
      Non-operating
      • From -20 °C to 65 °C
      Shipping
      • From -40 °C to 70 °C
      Humidity
      Operating
      • From 8 % to 90 %
      Non-operating
      • From 8 % to 90 %
      Shipping
      • From 5 % to 90 %
      Vibration
      Operating (Maximum) 2 G, with 15 - 500 Hz
      Non-operating (Maximum) 5 G, with 15 - 500 Hz
      Shock
      Operating (Maximum) 500 G, with 2 ms half sine wave
      Non-operating (Maximum) 1500 G, with 1 ms half sine wave
      Shipping (Maximum) 0.7 m free drop with no unrecoverable error. Drive must be packed in Toshiba´s original shipping package. Apply shock in each direction of the drive´s three mutual perpendicular axis, one axis at a time.
      Altitude
      Operating
      • From -300 m to 3,000 m
      Non-operating
      • From -300 m to 12,000 m
      Acoustic noise
      Idle mode (Disk spinning) Max. 16 dB Max. 18 dB Max. 18 dB
      Random seek Max. 22 dB Max. 23 dB Max. 23 dB
  • Downloads
Back to Top