MK1011GAH
Product Features
- 1.8-inch 100 GB Capacity
- Short Form Factor: 54mm x 8mm x 71mm (WxHxD)
- LIF (Low Insertion Force) connector
- Operating shock: 500G
Product info
Toshiba Storage Device Division introduces the world’s first 100GB 1.8-inch embedded HDD. The MK1011GAH reinforces Toshiba’s technical and manufacturing expertise in delivering high capacity mobile HDDs for consumer electronics applications.
The drive is based on perpendicular magnetic recording, utilise the new ATA-7 interface and delivers a data transfer rate of 100MB/s.
Furthermore, the Low Insertion Force (LIF) connector supports the drives smaller form factor without inhibiting the performance of the hard disk drive to its hosting device.
Enabling some of today’s most exciting, small form factor mobile devices, the new mini-drives offer manufacturers significant storage for consumer, commercial and PC applications- such as music players, handheld PCs, PDAs, wearable computers and laptops.
- Technical Specs
-
Model MK1011GAH Features Part number HDD1789 Formatted capacity 100,030 MByte Form factor 1.8 inch Interface type - 1.8'' ATA (LIF)
Supported interface standards - ATA-3
- ATA-4
- ATA-5
- ATA-6
- ATA-7
Head/actuator technology - "Ramp-Load" Technology
- PMR (Write)/TMR (Read)
Shock detection Shock sensor circuit S.M.A.R.T. The SMART command set is supported. Physical parameters Number of platters 2 Number of cylinders 68,111 Number of heads 4 Bytes/sector Bytes/sector 512 Access times Average seek time 15 ms Maximum seek time 26 ms Track-to-track seek time 3 ms Transfer rates Internal - From 176.9 MBit/s to 382.9 MBit/s
PIO mode (Host) PIO mode 4 (16.6 MByte/s) UDMA mode (Host) UDMA mode 5 (100 MByte/s) Rotational speed Rotational speed 4,200 rpm Buffer Buffer size 8,192 kByte Cache - Read-ahead cache
- Write cache
Reaction times Start time (Spin-up time, typical) 3.5 s Start time (Spin-up time, maximum) 20 s Recovery time (from stand-by, typical) 3 s Recovery time (from stand-by, maximum) 20 s Reliability specifications MTBF 300,000 Hours Power-on hours <333 hours/month Hours Product life 5 years or 20,000 POH (whatever comes earlier) Seek error rate 1 error per 10^6 seeks Non-recoverable error rate 1 error per 10^13 seeks Preventive maintenance No preventive maintenance is required Power consumption Start (Maximum) 1.8 W Seek (Average) 1.1 W Read (Average) 1.0 W Write (Average) 1.0 W Low-power idle (Average) 0.3 W Sleep (Average) 0.07 W Stand-by (Average) 0.12 Power supply motor Supply voltage - +3.3 V (+/-5 %)
Allowable noise/ripple Max. 70 mV Power supply logic Supply voltage - +3.3 V (+/-5 %)
Allowable noise/ripple Max. 70 mV Mechanical specifications Drive width 54 mm Drive height 8.0 mm Drive depth 71 mm Drive weight 0.059 kg Drive orientation The drive can be installed in all axes (6 directions) Temperature Operating - From 5 °C to 60 °C
Non-operating - From -20 °C to 65 °C
Shipping - From -40 °C to 70 °C
Humidity Operating - From 8 % to 90 %
Non-operating - From 8 % to 90 %
Shipping - From 5 % to 90 %
Wet bulb Operating (Maximum) 29 °C Non-operating (Maximum) 40 °C Vibration Operating (Maximum) 2 G, with 15 - 500 Hz Non-operating (Maximum) 5 G, with 15 - 500 Hz Shock Operating (Maximum) 500 G, with 2 ms half sine wave Non-operating (Maximum) 1500 G, with 1 ms half sine wave Shipping (Maximum) 0.7 m free drop with no unrecoverable error. Drive must be packed in Toshiba´s original shipping package. Apply shock in each direction of the drive´s three mutual perpendicular axis, one axis at a time. Altitude Operating - From -300 m to 3,000 m
Non-operating - From -300 m to 12,000 m
Acoustic noise Idle mode (Disk spinning) Max. 16 dB Random seek Max. 22 dB BIOS specifications Number of cylinders (Logical) 16,383 Number of heads (Logical) 16 Number of sectors/track (Logical) 63
-
- Downloads
-
Product photos mk1011gah.jpg Drive (opened), JPG format
2418 x 1612 pixels, 1340 KBDatasheets mk1011gah_datasheet.pdf PDF format, 93 KB
-