- SATA interface
- Perpendicular Magnetic Recording (PMR)
- 150 MB/s data transfer rate
- 200GB Capacity
- Super Slim at 9.5mm
- Non-operation Shock of 850G
Toshiba Storage Device Division introduces the 200GB 2.5-inch HDD, MK2035GSS. This drive is based on Perpendicular Magnetic Recording technology and has a capacity of 200 GB of data, the largest capacity of its class, using only 2 platters.
The MK2035GSS is currently the only 200 GB Hard Disk Drive available on the market with a height of only 9.5 mm. It weights only 98 grams and features lower power consumption compared to the traditional 3.5-inch HDDs.
This new drive features the Tunneling Magneto Resistive (TMR) head technology, rather than Giant Magneto Resistive (GMR) head technology.
It also incorporates the Serial ATA II interface and is ATA-7 compliant, supporting high transfer rates of up to 150 magabytes per second.
The MK2035GSS drive offers enough capacity and features for portable recording and editing, gaming, music and other multimedia applications.
- Technical Specs
Model MK2035GSS Features Part number HDD2A30 Formatted capacity 200,050 MByte Form factor 2.5 inch Interface type
- Serial ATA
Supported interface standards
- Serial ATA 1.0a
- Serial ATA II 1.2
- "Ramp-Load" Technology
- PMR (Write)/TMR (Read)
Shock detection Shock sensor circuit S.M.A.R.T. The SMART command set is supported. Physical parameters Number of platters 2 Number of cylinders 95,040 Number of heads 4 Bytes/sector Bytes/sector 512 Access times Average seek time 12 ms Maximum seek time 22 ms Track-to-track seek time 2 ms Transfer rates Internal
- From 268 MBit/s to 550 MBit/s
SATA (Host) 150 MByte/s Rotational speed Rotational speed 4,200 rpm Buffer Buffer size 8,192 kByte Cache
- Read-ahead cache
- Write cache
Reaction times Start time (Spin-up time, typical) 3.5 s Start time (Spin-up time, maximum) 9.5 s Recovery time (from stand-by, typical) 3.5 s Recovery time (from stand-by, maximum) 9.5 s Reliability specifications Seek error rate 1 error per 10^6 seeks Non-recoverable error rate 1 error per 10^13 seeks Product life 5 years or 20,000 POH (whatever comes earlier) Preventive maintenance No preventive maintenance is required Power consumption Start (Maximum) 4.5 W Seek (Average) 2.4 W Read (Average) 1.85 W Write (Average) 1.85 W Low-power idle (Average) 0.67 W Sleep (Average) 0.15 W Stand-by (Average) 0.25 W Power supply motor Supply voltage
- +5 V (+/- 5 %)
Allowable noise/ripple Max. 100 mV Power supply logic Supply voltage
- +5 V (+/- 5 %)
Allowable noise/ripple Max. 100 mV Mechanical specifications Drive width 69.85 mm Drive height 9.5 mm Drive depth 100 mm Drive weight 0.98 kg Drive orientation The drive can be installed in all axes (6 directions) Mounting instructions (Screwing) Four screws should be tightened equally with 0.39 Nm torque. The depth should be 3.0 mm minimum and 3.5 mm maximum Temperature Operating
- From 5 °C to 55 °C
- From -20 °C to 60 °C
- From -40 °C to 70 °C
- From 8 % to 90 %
- From 8 % to 90 %
- From 5 % to 90 %
Wet bulb Operating (Maximum) 29 °C Non-operating (Maximum) 40 °C Vibration Operating (Maximum) 1 G, with 5 - 500 Hz Non-operating (Maximum) 5 G, with 15 - 500 Hz Shock Operating (Maximum) 325 G, with 2 ms half sine wave Non-operating (Maximum) 850 G, with 1 ms half sine wave Shipping (Maximum) 0.7 m free drop with no unrecoverable error. Drive must be packed in Toshiba´s original shipping package. Apply shock in each direction of the drive´s three mutually perpendicular axes, one axis at a time. Altitude Operating
- From -300 m to 3,000 m
- From -400 m to 12,000 m
Acoustic noise Idle mode (Disk spinning) Max. 21 dB Random seek Max. 25 dB BIOS specifications Anzahl der Zylinder (logisch) 16,383 Number of heads (Logical) 16 Number of sectors/track (Logical) 63